hoop.euqset.orgのカーネルを2.6.14.2にしてみた。
ついでに(?)、買ってきたeSATA-SATA/2Pを取り付けて、SATAインタフェースを外に出し、RAIDON SR3610-2S-SB2を繋いだ。
あれこれmodprobeしてやっと認識。
関連しそうなlsmodの抜粋は下記。
# lsmod
Module Size Used by
ata_piix 9860 1
ide_scsi 18436 0
libata 49032 1 ata_piix
sd_mod 16384 2
sg 34720 0
sr_mod 17700 0
scsi_mod 100104 5 ide_scsi,libata,sd_mod,sg,sr_mod
cdrom 39072 1 sr_mod
ide_generic 1408 0 [permanent]
/var/log/syslogにはこんな感じ。
Nov 13 00:45:42 hobby kernel: ata_piix version 1.04
Nov 13 00:45:42 hobby kernel: ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 17
Nov 13 00:45:42 hobby kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64
Nov 13 00:45:42 hobby kernel: ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD800 irq 17
Nov 13 00:45:42 hobby kernel: ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xDC02 bmdma 0xD808 irq 17
Nov 13 00:45:42 hobby kernel: ATA: abnormal status 0x7F on port 0xE807
Nov 13 00:45:42 hobby kernel: scsi0 : ata_piix
Nov 13 00:45:42 hobby hotplug.murasaki[3829]: scsi_host is defined as "off"
Nov 13 00:45:42 hobby kernel: ata2: dev 0 cfg 49:2f00 82:0409 83:7500 84:4002 85:0409 86:3400 87:4002 88:203f
Nov 13 00:45:42 hobby kernel: ata2: dev 0 ATA, max UDMA/100, 488397168 sectors: lba48
Nov 13 00:45:42 hobby kernel: ata2(0): applying bridge limits
Nov 13 00:45:42 hobby kernel: ata2: dev 0 configured for UDMA/100
Nov 13 00:45:42 hobby kernel: scsi1 : ata_piix
Nov 13 00:45:42 hobby hotplug.murasaki[3830]: scsi_host is defined as "off"
Nov 13 00:45:42 hobby kernel: Vendor: ATA Model: STARDOM V.36.B03 Rev: V.36
Nov 13 00:45:42 hobby kernel: Type: Direct-Access ANSI SCSI revision: 05
Nov 13 00:45:42 hobby hotplug.murasaki[3831]: scsi is defined as "off"
Nov 13 00:45:42 hobby kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
Nov 13 00:45:42 hobby kernel: SCSI device sda: drive cache: write through
Nov 13 00:45:42 hobby kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
Nov 13 00:45:42 hobby kernel: SCSI device sda: drive cache: write through
Nov 13 00:45:42 hobby kernel: sda: sda1
Nov 13 00:45:42 hobby kernel: Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
Nov 13 00:45:42 hobby hotplug.murasaki[3834]: Unknown Hotplug name "scsi_generic"
Nov 13 00:45:42 hobby hotplug.murasaki[3834]: Add "scsi_generic" into /etc/murasaki/murasaki.genericlist if you want
Nov 13 00:45:42 hobby murasaki.generic[3833]: block device is added
Nov 13 00:45:42 hobby hotplug.murasaki[3835]: scsi_device is defined as "off"
Nov 13 00:45:42 hobby murasaki.generic[3832]: block device is added
Nov 13 00:45:42 hobby kernel: Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0, type 0
Nov 13 00:45:42 hobby murasaki.generic[3833]: Dependence(block) was found
Nov 13 00:45:42 hobby murasaki.generic[3832]: Dependence(block) was found
Nov 13 00:45:42 hobby murasaki.generic[3833]: Executing "/etc/murasaki/scripts/block" "start"
Nov 13 00:45:42 hobby murasaki.generic[3832]: Executing "/etc/murasaki/scripts/block" "start"
Nov 13 00:45:42 hobby kernel: kjournald starting. Commit interval 5 seconds
Nov 13 00:45:42 hobby kernel: EXT3 FS on sda1, internal journal
Nov 13 00:45:42 hobby kernel: EXT3-fs: mounted filesystem with ordered data mode.
0 件のコメント:
コメントを投稿