emobile H11HW on Ubuntu w/ Bluetooth connection (その1)

The Linux GPRS HOWTO: Bluetoothを見ながら、勉強中。
まだ、途中。

取り合えずmemo。

$ hcitool scan
Scanning ...
00:11:22:33:44:55	H11HW

$ sdptool browse 00:11:22:33:44:55
Browsing 00:11:22:33:44:55 ...
Service Name: Voice Gateway
Service RecHandle: 0x10000
Service Class ID List:
"Headset Audio Gateway" (0x1112)
"Generic Audio" (0x1203)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 3
Language Base Attr List:
code_ISO639: 0x656e
encoding:    0x6a
base_offset: 0x100
Profile Descriptor List:
"Headset" (0x1108)
Version: 0x0100
Service Name: Voice Gateway
Service RecHandle: 0x10001
Service Class ID List:
"Handfree Audio Gateway" (0x111f)
"Generic Audio" (0x1203)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 4
Language Base Attr List:
code_ISO639: 0x656e
encoding:    0x6a
base_offset: 0x100
Profile Descriptor List:
"Handsfree" (0x111e)
Version: 0x0105
Service Name: A2DP Source
Service RecHandle: 0x10002
Service Class ID List:
"Audio Source" (0x110a)
Protocol Descriptor List:
"L2CAP" (0x0100)
PSM: 25
"AVDTP" (0x0019)
uint16: 0x100
Language Base Attr List:
code_ISO639: 0x656e
encoding:    0x6a
base_offset: 0x100
Profile Descriptor List:
"Advanced Audio" (0x110d)
Version: 0x0100
Service Name: AVRCP Target
Service RecHandle: 0x10003
Service Class ID List:
"AV Remote Target" (0x110c)
Protocol Descriptor List:
"L2CAP" (0x0100)
PSM: 23
"AVCTP" (0x0017)
uint16: 0x100
Language Base Attr List:
code_ISO639: 0x656e
encoding:    0x6a
base_offset: 0x100
Profile Descriptor List:
"AV Remote" (0x110e)
Version: 0x0100
Service Name: Serial Port
Service RecHandle: 0x10004
Service Class ID List:
"Serial Port" (0x1101)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 16
Language Base Attr List:
code_ISO639: 0x656e
encoding:    0x6a
base_offset: 0x100
Profile Descriptor List:
"Serial Port" (0x1101)
Version: 0x0100
Service Name: Information Synchronization
Service RecHandle: 0x10005
Service Class ID List:
"IrMC Sync" (0x1104)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 17
"OBEX" (0x0008)
Language Base Attr List:
code_ISO639: 0x656e
encoding:    0x6a
base_offset: 0x100
Profile Descriptor List:
"IrMC Sync" (0x1104)
Version: 0x0100
Service Name: Object Push
Service RecHandle: 0x10006
Service Class ID List:
"OBEX Object Push" (0x1105)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 18
"OBEX" (0x0008)
Language Base Attr List:
code_ISO639: 0x656e
encoding:    0x6a
base_offset: 0x100
Profile Descriptor List:
"OBEX Object Push" (0x1105)
Version: 0x0100
Service Name: File Transfer
Service RecHandle: 0x10007
Service Class ID List:
"OBEX File Transfer" (0x1106)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 19
"OBEX" (0x0008)
Language Base Attr List:
code_ISO639: 0x656e
encoding:    0x6a
base_offset: 0x100
Profile Descriptor List:
"OBEX File Transfer" (0x1106)
Version: 0x0100
Service Name: Dial-up Networking
Service RecHandle: 0x10008
Service Class ID List:
"Dialup Networking" (0x1103)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 8
Language Base Attr List:
code_ISO639: 0x656e
encoding:    0x6a
base_offset: 0x100
Profile Descriptor List:
"Dialup Networking" (0x1103)
Version: 0x0100

上記の情報からService Name: Dial-up Networkingのchannelが8だと分かるので、

/etc/bluetooth/rfcomm.confを下記の様に設定してみた。

$ cat /etc/bluetooth/rfcomm.conf
#
# RFCOMM configuration file.
#
rfcomm0 {
# Automatically bind the device at startup
bind yes;
# Bluetooth address of the device
device 00:11:22:33:44:55;
# RFCOMM channel for the connection
channel	8;
# Description of the connection
comment "H11HW Bluetooth device";
}

ここまでくれば、後はpppconfigでやるだけだな(^^)