Z60tでLinux(その3)

linux-2.6.15.6を

make-kpkg --initrd binary

で作り、

dpkg -i kernel-image-2.6.15.6_10.00.Custom_i386.deb

を行ったのだが、dmesgを見ると、

SCSI subsystem initialized
libata version 1.20 loaded.
ata_piix 0000:00:1f.2: version 1.05
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x1810 irq 14
ata1: dev 0 cfg 49:2f00 82:746b 83:7d09 84:6023 85:746b 86:3c09 87:6023 88:203f
ata1: dev 0 ATA-6, max UDMA/100, 156301488 sectors: LBA48
ata1: dev 0 configured for UDMA/100
scsi0 : ata_piix
Vendor: ATA       Model: TOSHIBA MK8032GS  Rev: AS11
Type:   Direct-Access                      ANSI SCSI revision: 05
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
ata2: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
ata2: dev 0 ATAPI, max UDMA/33
ata2(0): applying bridge limits
ata2: dev 0 configured for UDMA/33
scsi1 : ata_piix
ata2(0): WARNING: ATAPI is disabled, device ignored.

となって、DVD/CDドライブが見えない。

あれこれ探したところ、CDROM Resolved. Re: SUCCESS: Re: First Kernel Build Attempt Failed was: Re: 3ware 9550 SATA RAID controller problemsとか、

Re: SUCCESS: Re: First Kernel Build Attempt Failed was: Re: 3ware 9550 SATA RAID controller problemsを発見した。

とりあえず、その通りやってみたところ、

SCSI subsystem initialized
libata version 1.20 loaded.
ata_piix 0000:00:1f.2: version 1.05
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x1810 irq 14
ata1: dev 0 cfg 49:2f00 82:746b 83:7d09 84:6023 85:746b 86:3c09 87:6023 88:203f
ata1: dev 0 ATA-6, max UDMA/100, 156301488 sectors: LBA48
ata1: dev 0 configured for UDMA/100
scsi0 : ata_piix
Vendor: ATA       Model: TOSHIBA MK8032GS  Rev: AS11
Type:   Direct-Access                      ANSI SCSI revision: 05
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
ata2: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
ata2: dev 0 ATAPI, max UDMA/33
ata2(0): applying bridge limits
ata2: dev 0 configured for UDMA/33
scsi1 : ata_piix
Vendor: MATSHITA  Model: DVD-RAM UJ-832    Rev: 1.00
Type:   CD-ROM                             ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: Attached scsi disk sda
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input1
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0

となって、認識してくれた。